01
Electronic scale control
Assess scale-related deposits in connected equipment. Pipe size, material, topology and electrical loops inform installation.
Focus: deposits & equipment conditions
QEQI / TECHNOLOGY
Understand the role. Know the limits.
Electronic treatment, basin sweeping and filtration solve different parts of a water-system problem.
Electronic water treatment
QEQI electronic treatment is assessed around connected equipment and the water-side deposit problem. Pipe material, diameter, branches and installation conditions form part of the assessment.
Signal and coverage
Check model-specific coverage, pipework and electrical loops.
Operating evidence
Evaluate the equipment and deposits under comparable conditions.
Moving and separating solids
Basin sweeping creates a planned flow to move settled solids. Centrifugal filtration separates particles under defined conditions.
Keep process responsibilities clear
Electronic scale control, particle separation and water-quality compliance are separate responsibilities. A site may need several coordinated processes. Neither scale control nor filtration universally replaces softening, membrane treatment, disinfection or chemical management.
Read the engineering guideSYSTEM ENGINEERING / TREATMENT LOGIC
Explore the technologyThree responsibilities. One system perspective.
Understand the problem before combining treatment methods.
02
Basin sweeping & filtration
Move settled solids toward collection and separate particles from circulation. Basin geometry, nozzle layout and hydraulic capacity guide the design.
Focus: collection & particle separation
03
Operating controls & evaluation
Keep necessary chemistry, hygiene and blowdown controls. Compare performance under documented load, flow and temperature conditions.
Focus: baseline & comparable operation
01Define the problem
02Match the configuration
03Check installation
04Measure operation
ENGINEERING INPUT / SELECTION CRITERIA
A specification is only the starting point.
A useful configuration connects product ratings to the actual operating environment.
| Assessment area | Site information | Engineering decision |
|---|---|---|
| Pipework & connectivity | Outside / nominal diameter, material, branches and closed electrical loops | Model fit, clearance and signal conditions |
| Hydraulic conditions | Flow, circulation path, pump position and available pressure | Installation location and filtration configuration |
| Water & process | Hardness, suspended solids, temperature and existing treatment | Treatment roles and processes to retain |
| Operation & maintenance | Load profile, cleaning history, inspection and discharge access | Comparable baseline and practical service access |
Electronic scale control, particle separation and water-quality compliance are separate responsibilities. A site may need several coordinated processes. Neither scale control nor filtration universally replaces softening, membrane treatment, disinfection or chemical management.
PERFORMANCE EVALUATION / MEASUREMENT
Make the operating evidence comparable.
Establish a baseline
Record equipment, deposits, cleaning intervals and existing water-treatment practice before changes.
Track operating conditions
Record load, flow, temperature, water quality and any parallel process changes during the observation period.
Review defined indicators
Compare cleaning records, pressure drop, heat-transfer behaviour or solids collection as appropriate to the application.
Attribute results carefully
Separate measured results, operator observations and financial estimates. Do not assume every change comes from one device.
A practical evaluation sequence
01
Define the problem
02
Match the configuration
03
Check installation
04
Measure operation
QEQI / TECHNICAL FAQ
Understand treatment before choosing equipment.
The differences between treatment methods, how to assess results and what to prepare for an engineering discussion.
Does scale control make hard water soft?
Scale control and softening have different objectives. Softening removes hardness ions; electronic scale control is assessed for deposits on equipment. A hardness or TDS reading alone cannot establish scale-control performance. If your process requires a specified hardness, retain the appropriate water-treatment process.
Which QEQI system should I consider?
Start with the treatment task: Q39 for suitable small hot-water systems, Q49 for suitable pool circulation, the industrial family for larger engineered systems, and booster for basin solids management. Then check pipe dimensions, operating conditions and existing treatment. Pipe diameter alone is not a complete selection method.
When should performance be reviewed?
Agree on a baseline and review period before installation. Compare deposit inspections, cleaning frequency, pressure drop and heat-transfer behaviour at similar loads. Water quality, temperature, cleaning and dosing changes should be logged. An operating indicator confirms device status, not a measured treatment outcome.
What happens to material released from deposits?
Plan how solids will leave the system through the applicable flushing, cleaning, filtration or discharge procedure. Electronic treatment is not a solids collection device. Inspect strainers, tanks and collection points during the review period, and check older pipework for existing defects before installation.
Can water quality or disinfection controls be removed?
Continue the controls required by your application. Scale control does not establish drinking-water safety or replace pool disinfection, microbial management, membrane treatment or chemical control. Any process change needs a separate technical review and monitoring plan.
What information makes a technical inquiry useful?
Include the application, treatment objective, pipe outside diameter and nominal designation, material, flow, temperature and available water-quality results. Add a pipework sketch, installation photographs, existing treatment and cleaning records where available. These inputs help distinguish equipment selection from process design.
ENGINEERING STARTS WITH CONTEXT
Discuss your systemTell us about your water system.
Pipework, operating conditions and your objectives. Let’s start there.